CNC portal cutting machine VARCUT S.P2N/B10

CNC portalni rezalnik VARCUT S.P2N/B10
The CNC portal cutting machines VARCULT L1 are very precise and reliable. The portal cutting machine has one head for plasma sheet metal cutting and two heads for flame cutting of sheet metal with a dual side longitudinal drive with AC motors. The cutting machine construction combined with the corresponding support table enables cutting of sheet metals, which are up to 300 mm thick.
Tehnical data

Tehnical data

Technical characteristics VARCUT 3,2 S.P2N/B10 LCD-2,0x6,0
1(G+PL)+1G		 VARCUT 3,7 S.P2N/B10 LCD-2,5x6,0
1(G+PL)+1G		 VARCUT 4,2 S.P2N/B10 LCD-3,0x6,0
1(G+PL)+1G
CNC controller BURNY 10 LCD BURNY 10 LCD BURNY 10 LCD
Work width 2.000 mm 2.500 mm
 3.000 mm
Work length 6.000 mm 6.000 mm
 6.000 mm
Cutting heads 2 x plamen + 1 x plazma 2 x plamen + 1 x plazma 2 x plamen + 1 x plazma
Drive version AC servomotor AC servomotor
 AC servomotor
Max. positioning speed do 15.000 mm/min do 15.000 mm/min do 15.000 mm/min
Programming accuracy ± 0.01 mm ± 0.01 mm
 ± 0.01 mm
Repeatability ± 0.1 mm ± 0.1 mm
 ± 0.1 mm
Torch height control version
MSX 750 CAP		 2 x MSX 750 CAP (flame) 2 x MSX 750 CAP (flame) 2 x MSX 750 CAP (flame)
  1x MSX 750 ARC (plasma) 1x MSX 750 ARC (plasma) 1x MSX 750 ARC (plasma)
Ordering code PO NAROČILU PO NAROČILU PO NAROČILU
Arc voltage (with or without contact) IHT 3000 IHT 3000
 IHT 3000
Standard equipment

Standard equipment

• Basic machine package with CNC controller
• 2 lateral carriages
• 2 torches for the selected fuel-gas
• Central gas diffusion with manometers
• A valve for automatic punching
• Remote flame ignition
Additional equipment

Additional equipment

• Plasma power source with machine torch (see page 38, 39)
• Programming software ZEVS RX Basic or ZEVS RX Pro
• Automatic tailoring module ZEVS
• Double nozzle for flange cutting
• Support table for sheet metal with segment extraction system (see p.41)
• Extraction-filter system ECO-AIR (see page 41, 42)
• Laser position indicator (determining the cutting point)
Optional

Optional

• Extension of the longitudinal rail
• Additional cutting heads
• Torch height control (see chart)